UPS

Power 10KVA / 7000W Voltage range 176 ±5VAC~276 ±5VAC, Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single-phase Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 13min (half load) / 5min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge time 90%

SUVTP30KH3B4S Features APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt Down Brackets, CD with software, Installation Guide, Network Management Card, Power modules ship installed, Start up included, User Manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously. Parallel-redundant capable Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub

Bullet Points Vertiv Liebert ItON 2000VA Line-Interactive 1200 W 6 AC outlet(s) : - ​USB port for user- friendly communications and OS shutdown ​ - Mix of localized Schuko and IEC sockets to also be able to address international requirements.​ - ​Automatic voltage regulator (AVR with boost and trim) - Compact size - Light weight - Easy operation - Overload protection and alarm - Auto re-start with AC recovery - Fast charging - Cold start function

Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.  This extends the life of the battery and is essential in areas where frequent power fluctuations are common.  The Mercury UPS 650VA- 3.0KVA Maverick Line Interactive UPS ideal for Personal Computers […]

Capacity 3KVA / 2400W Phase Single Phase Input voltage 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%; 160VAC(±5) ~ 295VAC(±5) if load ≥ 70% Frequency 46 ~ 54(50Hz)±0.5Hz; 56 ~ 64(60Hz)±0.5Hz auto-sensing Input power factor ≥ 0.97 Output voltage 220/230VAC ± 2% Frequency 50Hz / 60Hz ± 0.2% THD < 3% (linear load); < 5% (non linear load) Overload capability > 110%, 30s turn to bypass mode; > 150%, 300ms turn to bypass mode Crest factor 3:1 (max) AC Mode: 10 cycles, when voltage lower than rated 30%, and inrush current higher than rated 70%, turn off the inverter, no transfer to bypass, give alarm battery Mode: 10 cycles, when voltage lower than rated 30% and inrush current higher than rated 70%, turn off the inverter, give an alarm bypass Mode: Input fuse blew or break action Waveform Pure sine wave Transfer time 0ms between AC mode & Bypass mode 4ms

Liebert itON 800 VA is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. Liebert itON comes complete with an automatic voltage regulator (AVR) allowing flexibility and reliability for PCs and other sensitive electronic equipment. With its compact design and easy to use controls, Liebert itON also provides sufficient back up time, allowing work in progress to be saved safely before proceeding with the system shutdown. Liebert itON also comes complete with automatic restart and cold start functions for increased continuity and availability.

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

SmartSlot Customize UPS capabilities with management cards. Audible alarms Provides notification of changing utility power and UPS power conditions LCD display Alpha-Numeric Display which displays system parameters and alarms. LED status indicators Quickly understand unit and power status with visual indicators. Programmable frequency Ensures compatibility with different input frequencies. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Network manageable Provides remote power management of the UPS over the network.

FEATURES OF LIEBERT PSP UPS 650VA 230V - PSP650MT3-230U: A standby UPS design with a Step Wave output USB communication port and MultiLink software Minimum of three minutes of battery runtime at full resistive Load Data-Line (RJ-45) Surge Protection

Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries - 25 minutes runtime High-efficiency 3-phase UPS with internal batteries providing a runtime of 25 minutes. The UPS features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. For battery runtime details, see the runtime charts published under the Documents tab.

Output power capacity      2.1kWatts / 3.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 5% at full load Output Frequency (sync to mains)     50 Hz Waveform type     Sine wave Nominal Input Voltage   230V Input frequency           47 – 63 Hz Input Connections     IEC-320 C20 Input voltage range for main operations      180 – 287V Input voltage adjustable range for mains operation   170 – 300V Typical recharge time      3hour(s) Audible Alarm         Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating       300Joules 1 Year Warranty

The Vertiv Liebert GXT4 UPS, with a capacity of 3000VA/2700W, is a compact and reliable solution for maintaining the health and availability of your IT infrastructure. Using on-line, double-conversion technology, the Vertiv Liebert GXT4 UPS protects equipment from the full range of power disturbances, including sags, surges and noise, without drawing on battery power, extending battery life and minimizing replacements. The UPS runs on 230V AC power and includes hot-swappable batteries as well as all hardware for installing it as a tower or in an equipment rack. It is ENERGY STAR qualified and includes selectable eco-mode that enhances efficiency during off hours. With outstanding performance and reliability, the Vertiv Liebert GXT4 is the UPS of choice for applications with zero tolerance for downtime.

Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Liebert PSI is designed and packaged for flexibility and high availability 0.9 output power factor for active power maximization Up to 4 minutes backup time at full load, more than enough to grant orderly OS shutdown User replaceable, hot-swap batteries for increased availability Versatile rack-tower design which adapts to all types of installations Rotatable LED display which adapts to both rack and tower mounting Mounting hardware and shutdown software included in UPS package for increased ease of use

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Equipment with Boost and Buck AVR to Stabilize the input voltage Micropocessor control guarantees high reliability Provides AC overload Protection Auto restart with AC recover Compact size, lightweight Fast Charging Off Mode Charging Cold start function

APC Smart-UPS VT 10kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network management card, Power modules ship installed, Start up included, User manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

The Liebert IntelliSlot Unity Platform brings SNMP, BACnet IP, BACnet MSTP, Modbus TCP, Modbus RTU, YDN23 and Web management capability to many models of Vertiv's power and cooling equipment. The cards employ Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications. The card also supports communication for LIFE™ Services by VERTIV. Manufacturer: Vertiv. Manufacturer Part Number: IS-UNITY-SNMP. Brand Name: Liebert. Product Model: IS-UNITY-SNMP. Product Name: IS-UNITY-SNMP UPS Management Adapter. Product Type: UPS Management Adapter.