Power Products

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Description Mercury 5kva Inverter 4X 200AH Deep Cycle batteries and 8X high efficiency 260 watts Poly Solar Panels with Solar Charge Controller. This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 5kva Inverter Specification Intelligent long backup model Fully digitised microprocessor control LED Wide input range [90V -275V inverter mode 115V -270V UPS mode] Energy saving function with UPS green mode Cold start function Short circuit and overload protection Compatible with all generators Selectable  charging current 20A and 40A Weight 35kg 200ah Deep Cycle Battery Specification Nominal Voltage 12v Rated Capacity(20 Hour Rate) 200AH 10 Hour Rate (18.4A) 184AH 5  Hour Rate  (32.0A) 160AH 1 Hour Rate   (120.0A) 120AH 15 Minute Rate (328A)   82.0AH 82.0AH

Description The critically acclaimed Mercury 2.4 KVA Modified Sine Wave inverter with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

Liebert itON 800 VA is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. Liebert itON comes complete with an automatic voltage regulator (AVR) allowing flexibility and reliability for PCs and other sensitive electronic equipment. With its compact design and easy to use controls, Liebert itON also provides sufficient back up time, allowing work in progress to be saved safely before proceeding with the system shutdown. Liebert itON also comes complete with automatic restart and cold start functions for increased continuity and availability.

APC Easy UPS SRV 3000VA 230V (SRV3KI) High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions APC Easy UPS SRV 3000VA 230V High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User Manual Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.  

The Mercury Inverter 1.2KVA Complete System 100ah.    Ideal for a one-bedroom flat, private office and small shops. Example use case: 1. Laptop 1. Modem/Router 1. Solar Fan 2 Energy Saving Bulbs Smartphones This system will keep the above items (total 150 watts) powered for approximately 4 to 5  hours or more depending on usage.

Description Mercury 3kva Solar Hybrid Inverter MPPT SCC 2x 200ah Batteries 4x 250 Watt Monocrystalline Solar Panel Mercury 3kva Spirit Plus Solar Hybrid Inverter MPPT Charge Controller, 2X 200AH Deep Cycle batteries , and 4X high efficiency 250 watts Monocrystalline Solar Panels.  This is a complete Solar System that will allow you to power your home with or without NEPA, day and night. 3KVA Spirit Plus Hybrid Inverter Specification Inverter Mode Rated Power: 3KVA/3KW DC Input :   24Vdc, 110A AC Output:  230Vac, 50/60Hz, 12.5A AC Charger Mode AC Input :220 240Vac 13.8A DC Output : 27.1Vac,  25A/ 10A AC Output : 230Vac, 50/ 60Hz, 12.5A Solar Charger Mode Max Charger Current 40A System DC Voltage Range  24Vdc Operating Voltage Range: 30 – 75Vdc PV Optimal Work Voltage Range: 45 – 72 Vdc Max Solar Voltage (VOC) : 75Vdc Max PV Input Current : 20A

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

Description Mercury 15 kva 3 phase In 3 phase Out Automatic Voltage Regulator is 6 step transformer design in voltage stabilizing technology for extra reliability voltage protection against low and high voltage or any kind of surge that could damage your expensive equipment ideal for your heavy duty equipment can also applicable to you intelligent equipment because of soft start ability.

Description 300 Watt Monocrystalline Solar Panel Specification Maximum Power/Pmax(W)   300 Maximum Power Toleance    +3% Open Circuit Voltage   43.2 Short Circuit Current   8.85 Max Power Voltage    36 Max Power Current    8.35 Weight(Kg)    20.5 Dimensions(mm)  1000 Max System Voltage   27.00VDC +-0.5 Max Over Curretent Protecting Rating(A)   15 Module Application Class

Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries The Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter up and running properly.

Description Mercury 1.2KVA Inverter Modified Sine Wave The critically acclaimed Mercury 1.2KVA Inverter Modified Sine Wave with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

Bullet Points Vertiv Liebert ItON 2000VA Line-Interactive 1200 W 6 AC outlet(s) : - ​USB port for user- friendly communications and OS shutdown ​ - Mix of localized Schuko and IEC sockets to also be able to address international requirements.​ - ​Automatic voltage regulator (AVR with boost and trim) - Compact size - Light weight - Easy operation - Overload protection and alarm - Auto re-start with AC recovery - Fast charging - Cold start function

Description Mercury 10kVA AVR – 10kVA Automatic Voltage Regulator / Stabiliser Wide Input Voltage Range 100V ~ 270Vac Ideal for office automation system & home appliances 6 Steps Transformer Design In Voltage Stabilizing – For extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Compact Design – Sleek & handyGet the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage.

Description Mercury 2.4kva Inverter, 2X 200AH Deep Cycle batteries and 4X Premium Mercury 260 Watts Poly Solar Panel, with a sleek design and durable frame.    This is a complete Solar System which with Charge Controller.   It will allow you to power your home with or without NEPA, day and night. 2.4kva Inverter Specification Model 2.4KVA Voltage 230VAC Capacity 2400VA/1440W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 24V Floating Charge Voltage 27.00VDC +-0.5 Charge Current 10/20A Dimention 330 x 227.8 x 92.5 Net Weight (Kgs) 2.8 Gross Weight (Kgs) 3.3 200ah Deep Cycle Battery Specification Nominal Voltage 12v Rated Capacity(20 Hour Rate) 200AH 10 Hour Rate (18.4A) 184AH 5  Hour Rate  (32.0A) 160AH 1 Hour Rate   (120.0A) 120AH 15 Minute Rate (328A)   82.0AH 82.0AH

Description The Mercury Deep Cycle Battery 100Ah 12V Elite 100.  Leak-proof sealed maintenance free with a wide operating temperature, high impact resistant cast and low self-discharge. This battery comes with a 1-year warranty

Phase: Single Phase Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range: 130V ~ 280Vac Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment 1 Year Warranty

Product Description Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Specifications Capacity 30 KVA AC INPUT Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three phase+ N + G AC OUTPUT Voltage: 380 V / 400V Voltage: regulation accuracy   ± 3% Waveform:  Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion Response time: ± 10% varies< 1 s Over-voltage protection: Output phase voltage 433 V ± 5 V Under-voltage: Output phase voltage 316 V ± 5 V Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three phase) -lack-phase (three phase) -over temperature

Description Mercury 1.2KVA Inverter Modified Sine Wave The critically acclaimed Mercury 1.2KVA Inverter Modified Sine Wave with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

APC Smart-UPS Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Cold-start capable Provides temporary battery power when the utility power is out. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. High online efficiency Reduces utility costs, generates less heat. LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if

Description Mercury 2kva Spirit Plus Solar Hybrid Inverter MPPT Charge Controller, 2X 200AH Deep Cycle batteries and 4X high efficiency 300 watts Monocrystalline Solar Panels.  This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 2KVA Spirit Plus Hybrid Inverter Specification Inverter Mode Rated Power : 2KVA/2KW DC Input :   24Vdc, 110A AC Output:  230Vac, 50/60Hz, 12.5A AC Charger Mode AC Input :220 240Vac 13.8A DC Output : 27.1Vac,  25A/ 10A AC Output : 230Vac, 50/ 60Hz, 12.5A Solar Charger Mode Max Charger Current 40A System DC Voltage Range  24Vdc Operating Voltage Range : 30 – 75Vdc PV Optimal Work Voltage Range : 45 – 72 Vdc Max Solar Voltage (VOC) : 75Vdc Max PV Input Current : 20A

Description Mercury 2kva Solar Inverter 2x 200ah Batteries The Mercury 2kva Solar Inverter  2x 200ah Batteries is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 2kva Solar inverter (power factor 1.0) with two 200ah Deep Cycle batteries, which give excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter will be properly installed.   Your inverter will be

Low maintenance Suitable for use in areas with frequent power cuts Optimized material usage Longer life Minimum space required for storage and ventilation Applications Telecommunications Power stations Solar, wind power stations Large UPS and Computer back-up Railway signal stations Maritime standby power on ships and ashore

Description Mercury UPS Replacement Battery 7.5Ah 12V.  Minimum Order Quantity: 5