APC by Schneider Electric

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.  This extends the life of the battery and is essential in areas where frequent power fluctuations are common.  The Mercury UPS 650VA- 3.0KVA Maverick Line Interactive UPS ideal for Personal Computers […]

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide

APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.

Both internal and external accessibility Multiple users can access system Users are notified of problems Problems are identified through data and event logging User friendly UPS Firmware Upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages

APC Easy UPS SRV 3000VA 230V (SRV3KI) High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions APC Easy UPS SRV 3000VA 230V High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User Manual Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.  

Product Description Vertiv Liebert GXT5 1500VA 230V UPS The Liebert GXT5 UPS in an on-line double conversion USP solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single phase UPS operates with a high power efficiency and it is ideally suited to protect critical infrastructure in both centralized and edge of network applications.

Adaptability Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual Built in Battery 12V/9AH X 6 Nos.

APC Smart-UPS VT 10kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network management card, Power modules ship installed, Start up included, User manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual

Both internal and external accessibility Multiple users can access system Users are notified of problems Temperature and (optional) temperature & humidity monitoring Problems are identified through data and event logging User friendly UPS firmware upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages

Number of Power Cords 1 Maximum Height 1.6inches (41MM, 4.1CM) Maximum Width 17.5inches (445MM, 44.5CM) Maximum Depth 3.3inches (83MM, 0.0CM) Net Weight 0.99lbs. (0.45KG) Shipping weight 1.5lbs. (0.68KG) Shipping Height 2.5inches (64MM, 6.4CM) Shipping Width 18.6inches (473MM, 47.3CM) Shipping Depth 3.7inches (95MM, 9.5CM) Color Black

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

Description: SURT20KRMXL APC Smart-UPS RT 20kVA RM 230V High density, double-conversion on-line power protection with scalable runtime Includes : CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual , Web/SNMP Management Card Dual mains input Increases availability by allowing the UPS to be connected to two separate power sources. LCD display Alpha-Numeric Display which displays system parameters and alarms. Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS. Single or three-phase input wireable Provides flexibility for the UPS to be installed using either single or three-phase input wiring.

APC Easy UPS SMV 1400WATTS/2000VA, Universal Outlet, 230V Output power capacity 1.4kWatts / 2.0kVA Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC-320 C14 APC Easy UPS SMV 2000VA, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronic

Product Type: Rack Cabinet Color: Black Rack Height: 42U Rack Width: 19" Standard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways ... Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panel

PRODUCT DETAILS APC Smart-UPS C 3000VA LCD, 230V with model no. SMC3000I and maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. APC by Schneider Electric is reputed for outstanding quality and great performance. APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection. for load below 2100 watts, the APC Smart-UPS C 3000VA (SMC3000I) is what you need.

Smart-UPS SRT 10000VA 230V APC Smart-UPS On-Line,10 kW /10 kVA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card