APC by Schneider Electric

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 20.7inches (527MM, 52.7CM) Maximum Depth 3.5inches (89MM, 0.0CM) Net Weight 6.02lbs. (2.73KG) Shipping weight 8.02lbs. (3.64KG) Shipping Height 2.8inches (71MM, 7.1CM) Shipping Width 27.4inches (696MM, 69.6CM) Shipping Depth 5.6inches (142MM, 14.2CM) Color Grey

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Max Configurable Power (Watts) 30.0kWatts / 30.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations  304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 2 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.  This extends the life of the battery and is essential in areas where frequent power fluctuations are common.  The Mercury UPS 650VA- 3.0KVA Maverick Line Interactive UPS ideal for Personal Computers […]

Output power capacity      2.1kWatts / 3.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 5% at full load Output Frequency (sync to mains)     50 Hz Waveform type     Sine wave Nominal Input Voltage   230V Input frequency           47 – 63 Hz Input Connections     IEC-320 C20 Input voltage range for main operations      180 – 287V Input voltage adjustable range for mains operation   170 – 300V Typical recharge time      3hour(s) Audible Alarm         Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating       300Joules 1 Year Warranty

APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.

High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty car

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Number of Power Cords 1 Maximum Height 1.6inches (41MM, 4.1CM) Maximum Width 17.5inches (445MM, 44.5CM) Maximum Depth 3.3inches (83MM, 0.0CM) Net Weight 0.99lbs. (0.45KG) Shipping weight 1.5lbs. (0.68KG) Shipping Height 2.5inches (64MM, 6.4CM) Shipping Width 18.6inches (473MM, 47.3CM) Shipping Depth 3.7inches (95MM, 9.5CM) Color Black

SmartSlot Customize UPS capabilities with management cards. Audible alarms Provides notification of changing utility power and UPS power conditions LCD display Alpha-Numeric Display which displays system parameters and alarms. LED status indicators Quickly understand unit and power status with visual indicators. Programmable frequency Ensures compatibility with different input frequencies. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Network manageable Provides remote power management of the UPS over the network.

Number of Power Cords 1 Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 19.0inches (483MM, 48.3CM) Maximum Depth 0.6inches (15MM, 0.0CM) Net Weight 0.51lbs. (0.23KG) Shipping weight 0.84lbs. (0.38KG) Shipping Height 3.9inches (99MM, 9.9CM) Shipping Width 23.4inches (594MM, 59.4CM) Shipping Depth 1.5inches (38MM, 3.8CM) Color Black

Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries - 25 minutes runtime High-efficiency 3-phase UPS with internal batteries providing a runtime of 25 minutes. The UPS features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. For battery runtime details, see the runtime charts published under the Documents tab.

WSTRTUP-EZ-30 Features Start-Up Service 5X8 for (1) Easy UPS 3S 30kVA UPS A set of service options designed to deliver the vital resources, expertise, and tools needed to quickly and efficiently implement your APC by Schneider Electric solution Functional verification During each Preventive Maintenance visit, our Certified Field Service Engineers will run tests to verify your system is functioning correctly in all operational modes, stopping problems before they start. Installation verification Once the equipment is assembled, an APC Certified Field Service Engineer will verify all connections within the system have been made according to factory specification, and that it is functioning correctly in all modes of operation, ensuring optimal performance and extending the life of the product. Labor and travel expenses included Travel and labor expenses are included in most service contracts. Please see the statement of work for the service specifics. Logistics coordination APC will coordinate the logistics of

Both internal and external accessibility Multiple users can access system Users are notified of problems Problems are identified through data and event logging User friendly UPS Firmware Upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

Max Configurable Power (Watts) 20.0kWatts / 20.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

APC Easy UPS SMV 1400WATTS/2000VA, Universal Outlet, 230V Output power capacity 1.4kWatts / 2.0kVA Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC-320 C14 APC Easy UPS SMV 2000VA, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronic

APC Easy UPS SRV 3000VA 230V (SRV3KI) High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions APC Easy UPS SRV 3000VA 230V High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User Manual Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.  

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide