APC by Schneider Electric

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual

Max Configurable Power (Watts) 20.0kWatts / 20.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual Built in Battery 12V/9AH X 6 Nos.

Number of Power Cords 1 Maximum Height 1.6inches (41MM, 4.1CM) Maximum Width 17.5inches (445MM, 44.5CM) Maximum Depth 3.3inches (83MM, 0.0CM) Net Weight 0.99lbs. (0.45KG) Shipping weight 1.5lbs. (0.68KG) Shipping Height 2.5inches (64MM, 6.4CM) Shipping Width 18.6inches (473MM, 47.3CM) Shipping Depth 3.7inches (95MM, 9.5CM) Color Black

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Product Type: Rack Cabinet Color: Black Rack Height: 42U Rack Width: 19" Standard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways ... Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panel

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

Smart-UPS SRT 10000VA 230V APC Smart-UPS On-Line,10 kW /10 kVA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card

PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply

APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.

Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Adaptability Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Max Configurable Power (Watts) 30.0kWatts / 30.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations  304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 2 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Number of Power Cords 1 Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 19.0inches (483MM, 48.3CM) Maximum Depth 0.6inches (15MM, 0.0CM) Net Weight 0.51lbs. (0.23KG) Shipping weight 0.84lbs. (0.38KG) Shipping Height 3.9inches (99MM, 9.9CM) Shipping Width 23.4inches (594MM, 59.4CM) Shipping Depth 1.5inches (38MM, 3.8CM) Color Black

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

APC Smart-UPS VT 10kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network management card, Power modules ship installed, Start up included, User manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

Product Description Vertiv Liebert GXT5 1500VA 230V UPS The Liebert GXT5 UPS in an on-line double conversion USP solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single phase UPS operates with a high power efficiency and it is ideally suited to protect critical infrastructure in both centralized and edge of network applications.

Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries - 25 minutes runtime High-efficiency 3-phase UPS with internal batteries providing a runtime of 25 minutes. The UPS features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. For battery runtime details, see the runtime charts published under the Documents tab.

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card