Output power capacity 2.1kWatts / 3.0kVA Nominal Output Voltage 230V Output Voltage Distortion Less than 5% at full load Output Frequency (sync to mains) 50 Hz Waveform type Sine wave Nominal Input Voltage 230V Input frequency 47 – 63 Hz Input Connections IEC-320 C20 Input voltage range for main operations 180 – 287V Input voltage adjustable range for mains operation 170 – 300V Typical recharge time 3hour(s) Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating 300Joules 1 Year Warranty
APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS
APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty
APC Smart-UPS VT 10kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network management card, Power modules ship installed, Start up included, User manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply
Output power capacity 6.0kWatts / 6.0kVA Nominal Output Voltage 230V Output Voltage Distortion Less than 2% Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Load Crest Factor 3 : 1 Topology Double Conversion Online Waveform type Sine wave Bypass Internal Bypass (Automatic and Manual) Nominal Input Voltage 230V Input frequency 40 – 70 Hz (auto sensing) Input Connections Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations 160 – 275V Input voltage adjustable range for mains operation 100 – 275 (half load)V Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 1.5hour(s) Nominal Battery Voltage 192V Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel Multi-function LCD status and control console Audible Alarm Audible and visible alarms prioritized by severity Emergency Power Off (EPO) Yes Surge energy rating 80Joules 1 Year Warranty
Both internal and external accessibility Multiple users can access system Users are notified of problems Temperature and (optional) temperature & humidity monitoring Problems are identified through data and event logging User friendly UPS firmware upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages
APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual Built in Battery 12V/9AH X 6 Nos.
Both internal and external accessibility Multiple users can access system Users are notified of problems Problems are identified through data and event logging User friendly UPS Firmware Upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages
Product Description Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Number of Power Cords 1 Maximum Height 1.6inches (41MM, 4.1CM) Maximum Width 17.5inches (445MM, 44.5CM) Maximum Depth 3.3inches (83MM, 0.0CM) Net Weight 0.99lbs. (0.45KG) Shipping weight 1.5lbs. (0.68KG) Shipping Height 2.5inches (64MM, 6.4CM) Shipping Width 18.6inches (473MM, 47.3CM) Shipping Depth 3.7inches (95MM, 9.5CM) Color Black
Number of Power Cords 1 Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 19.0inches (483MM, 48.3CM) Maximum Depth 0.6inches (15MM, 0.0CM) Net Weight 0.51lbs. (0.23KG) Shipping weight 0.84lbs. (0.38KG) Shipping Height 3.9inches (99MM, 9.9CM) Shipping Width 23.4inches (594MM, 59.4CM) Shipping Depth 1.5inches (38MM, 3.8CM) Color Black
Product Type: Rack Cabinet Color: Black Rack Height: 42U Rack Width: 19" Standard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways ... Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panel