UPS

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

Output power capacity      2.1kWatts / 3.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 5% at full load Output Frequency (sync to mains)     50 Hz Waveform type     Sine wave Nominal Input Voltage   230V Input frequency           47 – 63 Hz Input Connections     IEC-320 C20 Input voltage range for main operations      180 – 287V Input voltage adjustable range for mains operation   170 – 300V Typical recharge time      3hour(s) Audible Alarm         Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating       300Joules 1 Year Warranty

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

FEATURES OF LIEBERT PSP UPS 650VA 230V - PSP650MT3-230U: A standby UPS design with a Step Wave output USB communication port and MultiLink software Minimum of three minutes of battery runtime at full resistive Load Data-Line (RJ-45) Surge Protection

Capacity: 20kVA / 18kW Battery Voltage: 384VDC (32 x 12V,Batteries Not included) Model: Mercury EP20K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode Dimensions(WxDxH) mm: 930 x 700 x 1390 Weight G/N (kg): 242/266

Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.  This extends the life of the battery and is essential in areas where frequent power fluctuations are common.  The Mercury UPS 650VA- 3.0KVA Maverick Line Interactive UPS ideal for Personal Computers […]

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub

The Liebert itON 1500 VA is a reliable line-interactive UPS designed to protect desktops and standalone computing equipment. The Liebert itON comes with an automatic voltage regulator (AVR) to provide flexibility and reliability to computers and other sensitive electronic equipment. With its compact design and easy-to-use controls, the Liebert itON offers sufficient autonomy to safely back up current tasks before shutting down the system.

The Vertiv™ LiebertGXT5 UPS is an online double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. The LiebertGXT5 single phase UPS operates with high power efficiency and it is ideally suited to protect critical infrastructure in both centralised and edge network applications. Scalable runtime options with matching external battery cabinets offer additional flexibility when extended uninterrupted power is required. User friendly LCD interface as well as full network management capability, including configuration and remote updates, make this system easy to deploy and simple to maintain. With market leading efficiency and unity power factor operation, the LiebertGXT5 will fill your critical application needs. Sleep well knowing your business is protected by the premium products from Vertiv.

Liebert PSI-XR 2200VA is a compact, line-interactive UPS system designed especially for IT applications such as network closets and small data centers. The flexible design of Liebert PSI-XR allows the unit to be configured as a self-standing tower or to be rack-mounted within a 2U space. It is available in four capacities.

APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.

Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply

WSTRTUP-EZ-30 Features Start-Up Service 5X8 for (1) Easy UPS 3S 30kVA UPS A set of service options designed to deliver the vital resources, expertise, and tools needed to quickly and efficiently implement your APC by Schneider Electric solution Functional verification During each Preventive Maintenance visit, our Certified Field Service Engineers will run tests to verify your system is functioning correctly in all operational modes, stopping problems before they start. Installation verification Once the equipment is assembled, an APC Certified Field Service Engineer will verify all connections within the system have been made according to factory specification, and that it is functioning correctly in all modes of operation, ensuring optimal performance and extending the life of the product. Labor and travel expenses included Travel and labor expenses are included in most service contracts. Please see the statement of work for the service specifics. Logistics coordination APC will coordinate the logistics of

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Power 10KVA / 7000W Voltage range 176 ±5VAC~276 ±5VAC, Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single-phase Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 13min (half load) / 5min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge time 90%

APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS

APC Easy UPS SMV 1400WATTS/2000VA, Universal Outlet, 230V Output power capacity 1.4kWatts / 2.0kVA Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC-320 C14 APC Easy UPS SMV 2000VA, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronic

Power 6KVA / 4200W Voltage range 176 ±5VAC~276 ±5VAC Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single phase se Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 20min (half load) / 7min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge

Description: SURT20KRMXL APC Smart-UPS RT 20kVA RM 230V High density, double-conversion on-line power protection with scalable runtime Includes : CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual , Web/SNMP Management Card Dual mains input Increases availability by allowing the UPS to be connected to two separate power sources. LCD display Alpha-Numeric Display which displays system parameters and alarms. Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS. Single or three-phase input wireable Provides flexibility for the UPS to be installed using either single or three-phase input wiring.

The Vertiv Liebert GXT4 UPS, with a capacity of 3000VA/2700W, is a compact and reliable solution for maintaining the health and availability of your IT infrastructure. Using on-line, double-conversion technology, the Vertiv Liebert GXT4 UPS protects equipment from the full range of power disturbances, including sags, surges and noise, without drawing on battery power, extending battery life and minimizing replacements. The UPS runs on 230V AC power and includes hot-swappable batteries as well as all hardware for installing it as a tower or in an equipment rack. It is ENERGY STAR qualified and includes selectable eco-mode that enhances efficiency during off hours. With outstanding performance and reliability, the Vertiv Liebert GXT4 is the UPS of choice for applications with zero tolerance for downtime.

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Liebert PSI is designed and packaged for flexibility and high availability 0.9 output power factor for active power maximization Up to 4 minutes backup time at full load, more than enough to grant orderly OS shutdown User replaceable, hot-swap batteries for increased availability Versatile rack-tower design which adapts to all types of installations Rotatable LED display which adapts to both rack and tower mounting Mounting hardware and shutdown software included in UPS package for increased ease of use

Description Fits racks with 18 in.- 32 in. deep support rails Features Vertiv Liebert Rack Mount Brackets - 18"-32" Vertiv GXT5 UPS Shelf Support - Supports Rack-Based Equipment, Easy Installation

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of