UPS

The Vertiv Liebert GXT4 UPS, with a capacity of 3000VA/2700W, is a compact and reliable solution for maintaining the health and availability of your IT infrastructure. Using on-line, double-conversion technology, the Vertiv Liebert GXT4 UPS protects equipment from the full range of power disturbances, including sags, surges and noise, without drawing on battery power, extending battery life and minimizing replacements. The UPS runs on 230V AC power and includes hot-swappable batteries as well as all hardware for installing it as a tower or in an equipment rack. It is ENERGY STAR qualified and includes selectable eco-mode that enhances efficiency during off hours. With outstanding performance and reliability, the Vertiv Liebert GXT4 is the UPS of choice for applications with zero tolerance for downtime.

SUVTP30KH3B4S Features APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications. Includes: Battery modules ship installed, Bolt Down Brackets, CD with software, Installation Guide, Network Management Card, Power modules ship installed, Start up included, User Manual Parallel-capacity capable Increases total power capacity by using multiple uninterruptible power supplies simultaneously. Parallel-redundant capable Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Power 6KVA / 4200W Voltage range 176 ±5VAC~276 ±5VAC Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single phase se Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 20min (half load) / 7min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

Capacity 3KVA / 2400W Phase Single Phase Input voltage 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%; 160VAC(±5) ~ 295VAC(±5) if load ≥ 70% Frequency 46 ~ 54(50Hz)±0.5Hz; 56 ~ 64(60Hz)±0.5Hz auto-sensing Input power factor ≥ 0.97 Output voltage 220/230VAC ± 2% Frequency 50Hz / 60Hz ± 0.2% THD < 3% (linear load); < 5% (non linear load) Overload capability > 110%, 30s turn to bypass mode; > 150%, 300ms turn to bypass mode Crest factor 3:1 (max) AC Mode: 10 cycles, when voltage lower than rated 30%, and inrush current higher than rated 70%, turn off the inverter, no transfer to bypass, give alarm battery Mode: 10 cycles, when voltage lower than rated 30% and inrush current higher than rated 70%, turn off the inverter, give an alarm bypass Mode: Input fuse blew or break action Waveform Pure sine wave Transfer time 0ms between AC mode & Bypass mode 4ms

Liebert itON 800 VA is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. Liebert itON comes complete with an automatic voltage regulator (AVR) allowing flexibility and reliability for PCs and other sensitive electronic equipment. With its compact design and easy to use controls, Liebert itON also provides sufficient back up time, allowing work in progress to be saved safely before proceeding with the system shutdown. Liebert itON also comes complete with automatic restart and cold start functions for increased continuity and availability.

Minimized installation time and costs ECO mode for high efficiency and reduced TCO (1-3 kVA) Mix of localized Schuko and IEC sockets  to be able to address both local and international requirements (1-3 kVA) Intuitive LCD display for easier user interface ​​ Features Available in five ratings from 1 kVA up to 10 kVA Multiple communication options (USB, RS232) Network and volt-free contact cards (optional) Frequency converter operation 50/60 Hz Wide input voltage range Input circuit breaker Maintenance bypass (6-10 kVA)

Equipment with Boost and Buck AVR to Stabilize the input voltage Micropocessor control guarantees high reliability Provides AC overload Protection Auto restart with AC recover Compact size, lightweight Fast Charging Off Mode Charging Cold start function

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Liebert PSI-XR 2200VA is a compact, line-interactive UPS system designed especially for IT applications such as network closets and small data centers. The flexible design of Liebert PSI-XR allows the unit to be configured as a self-standing tower or to be rack-mounted within a 2U space. It is available in four capacities.

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub

FEATURES OF LIEBERT PSP UPS 650VA 230V - PSP650MT3-230U: A standby UPS design with a Step Wave output USB communication port and MultiLink software Minimum of three minutes of battery runtime at full resistive Load Data-Line (RJ-45) Surge Protection

APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Liebert PSI is a feature-rich UPS system with industry leading 0.9 power factor. Its high power output delivers superior performance on power factor corrected (PFC) power supply and satisfactory backup time in the high demand environment. Liebert Multilink UPS software protects servers through local USB communication or via a network. Matching external battery cabinets offer UPS backup time to several hours in the extended requirements (for Liebert PSI-XR models only).

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide

Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Power 10KVA / 7000W Voltage range 176 ±5VAC~276 ±5VAC, Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single-phase Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 13min (half load) / 5min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge time 90%

The Vertiv™ LiebertGXT5 UPS is an online double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. The LiebertGXT5 single phase UPS operates with high power efficiency and it is ideally suited to protect critical infrastructure in both centralised and edge network applications. Scalable runtime options with matching external battery cabinets offer additional flexibility when extended uninterrupted power is required. User friendly LCD interface as well as full network management capability, including configuration and remote updates, make this system easy to deploy and simple to maintain. With market leading efficiency and unity power factor operation, the LiebertGXT5 will fill your critical application needs. Sleep well knowing your business is protected by the premium products from Vertiv.

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Capacity: 20kVA / 18kW Battery Voltage: 384VDC (32 x 12V,Batteries Not included) Model: Mercury EP20K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode Dimensions(WxDxH) mm: 930 x 700 x 1390 Weight G/N (kg): 242/266

SmartSlot Customize UPS capabilities with management cards. Audible alarms Provides notification of changing utility power and UPS power conditions LCD display Alpha-Numeric Display which displays system parameters and alarms. LED status indicators Quickly understand unit and power status with visual indicators. Programmable frequency Ensures compatibility with different input frequencies. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Network manageable Provides remote power management of the UPS over the network.

APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS

PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply