UPS

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide

Capacity 3KVA / 2400W Phase Single Phase Input voltage 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%; 160VAC(±5) ~ 295VAC(±5) if load ≥ 70% Frequency 46 ~ 54(50Hz)±0.5Hz; 56 ~ 64(60Hz)±0.5Hz auto-sensing Input power factor ≥ 0.97 Output voltage 220/230VAC ± 2% Frequency 50Hz / 60Hz ± 0.2% THD < 3% (linear load); < 5% (non linear load) Overload capability > 110%, 30s turn to bypass mode; > 150%, 300ms turn to bypass mode Crest factor 3:1 (max) AC Mode: 10 cycles, when voltage lower than rated 30%, and inrush current higher than rated 70%, turn off the inverter, no transfer to bypass, give alarm battery Mode: 10 cycles, when voltage lower than rated 30% and inrush current higher than rated 70%, turn off the inverter, give an alarm bypass Mode: Input fuse blew or break action Waveform Pure sine wave Transfer time 0ms between AC mode & Bypass mode 4ms

Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries - 25 minutes runtime High-efficiency 3-phase UPS with internal batteries providing a runtime of 25 minutes. The UPS features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. For battery runtime details, see the runtime charts published under the Documents tab.

FEATURES OF LIEBERT PSP UPS 650VA 230V - PSP650MT3-230U: A standby UPS design with a Step Wave output USB communication port and MultiLink software Minimum of three minutes of battery runtime at full resistive Load Data-Line (RJ-45) Surge Protection

The Liebert IntelliSlot Unity Platform brings SNMP, BACnet IP, BACnet MSTP, Modbus TCP, Modbus RTU, YDN23 and Web management capability to many models of Vertiv's power and cooling equipment. The cards employ Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications. The card also supports communication for LIFE™ Services by VERTIV. Manufacturer: Vertiv. Manufacturer Part Number: IS-UNITY-SNMP. Brand Name: Liebert. Product Model: IS-UNITY-SNMP. Product Name: IS-UNITY-SNMP UPS Management Adapter. Product Type: UPS Management Adapter.

APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS

Rotatable multi-language LCD display panel Compact 5Us or 6Us height and short depth ( Automatic frequency sensing Frequency conversion capability Rack & tower mounting flexibility User replaceable hot-swappable internal batteries Extended backup time with additional battery cabinets Liebert IntelliSlot® communication port available Includes Windows®-based configuration program Built-in USB communication ports for use with Liebert MultiLink™ automated shutdown software Built-in closure signals Emergency power-off (EPO)

Power 10KVA / 7000W Voltage range 176 ±5VAC~276 ±5VAC, Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single-phase Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 13min (half load) / 5min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge time 90%

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply

WSTRTUP-EZ-30 Features Start-Up Service 5X8 for (1) Easy UPS 3S 30kVA UPS A set of service options designed to deliver the vital resources, expertise, and tools needed to quickly and efficiently implement your APC by Schneider Electric solution Functional verification During each Preventive Maintenance visit, our Certified Field Service Engineers will run tests to verify your system is functioning correctly in all operational modes, stopping problems before they start. Installation verification Once the equipment is assembled, an APC Certified Field Service Engineer will verify all connections within the system have been made according to factory specification, and that it is functioning correctly in all modes of operation, ensuring optimal performance and extending the life of the product. Labor and travel expenses included Travel and labor expenses are included in most service contracts. Please see the statement of work for the service specifics. Logistics coordination APC will coordinate the logistics of

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

APC Easy UPS SRV 3000VA 230V (SRV3KI) High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions APC Easy UPS SRV 3000VA 230V High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User Manual Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.  

KEY FEATURES Capacity: 10kVA; Power: 9kW Battery Voltage: 384VDC (32 x 12V) – Batteries not included Model: Mercury EP10K Technology: Double Conversion Online Load Bus Synchronization (LBS) Function Advanced IGBT Rectifier To Have Low THDi & High PF LCD Indication & Audible Alarm Function Front Accessible Module Design For Ease Of Maintenance Wide Input Voltage Range Intelligent Battery Management Flexibility Of Configurable Battery Bank Parallel Redundancy Surge, Short Circuit & Overload Protection Low Audible Noise; Low Output Voltage Cold Start; ECO Mode SPECIFICATIONS Size (L x W x H cm) mm: 930 x 700 x 1390 Weight (kg) 215 Colour: Black Product Warranty: One Year Warranty

Power 6KVA / 4200W Voltage range 176 ±5VAC~276 ±5VAC Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing Input phase Single-phase Power factor ≥0.98 Voltage range 220VAC ±1% Output phase Single phase se Frequency 50Hz ±0.2% (battery mode) THD < 2% (Linear load); < 6% (non-Linear load) Overload 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode Crest factor 3:1 (max) Waveform Pure sine wave Transfer time 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) Efficiency ≥88% AC mode 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. Battery mode 5 cycles turn off the inverter, provide an alarm. Bypass mode Input fuse has blown or break action. Battery Model 12V sealed lead acid maintenance-free DC voltage 240VDC Configuration 20x 12V/8.2AH Backup time 20min (half load) / 7min (full load) Charge current 1A (standard unit) / 5A (long time unit) Recharge

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub

Bullet Points Vertiv Liebert ItON 2000VA Line-Interactive 1200 W 6 AC outlet(s) : - ​USB port for user- friendly communications and OS shutdown ​ - Mix of localized Schuko and IEC sockets to also be able to address international requirements.​ - ​Automatic voltage regulator (AVR with boost and trim) - Compact size - Light weight - Easy operation - Overload protection and alarm - Auto re-start with AC recovery - Fast charging - Cold start function

Description Fits racks with 18 in.- 32 in. deep support rails Features Vertiv Liebert Rack Mount Brackets - 18"-32" Vertiv GXT5 UPS Shelf Support - Supports Rack-Based Equipment, Easy Installation

This true on-line double conversion UPS system is available in larger capacity models of 5 kVA - 10 kVA, featuring integrated maintenance bypass as well as optional extended battery runtime. The Liebert GXT4 UPS is designed for use in either rack or tower configurations. It maintains a compact footprint in all ratings, with 5000 - 6000 VA models with a height of 5 U, and 10000 VA with a height of 6 U, as well as a short depth of Flexibility: Rotatable multi-language LCD display panel Compact 5Us or 6Us height and short depth ( Automatic frequency sensing Frequency conversion capability Rack & tower mounting flexibility User replaceable hot-swappable internal batteries Extended backup time with additional battery cabinets Liebert IntelliSlot® communication port available Includes Windows®-based configuration program Built-in USB communication ports for use with Liebert MultiLink™ automated shutdown software Built-in closure signals

Product Description Liebert PSI XR series is a feature-rich UPS system designed especially for today's IT applications such as servers, storage, and networking equipment. Its high power output delivers superior performance on power factor corrected (PFC) power supply and satisfactory backup time in the high demand environment.