APC by Schneider Electric

Max Configurable Power (Watts) 20.0kWatts / 20.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Adaptability Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.  This extends the life of the battery and is essential in areas where frequent power fluctuations are common.  The Mercury UPS 650VA- 3.0KVA Maverick Line Interactive UPS ideal for Personal Computers […]

Product Description Vertiv Liebert GXT5 1500VA 230V UPS The Liebert GXT5 UPS in an on-line double conversion USP solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single phase UPS operates with a high power efficiency and it is ideally suited to protect critical infrastructure in both centralized and edge of network applications.

APC Easy UPS SMV 3000VA Universal Outlet 230V UPS Mtech SMV3000AI-MS APC Easy UPS SMV 3000VA, Universal Outlet, 230V Configurable Power upto 2.1 kWatts Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. APC Easy UPS SMV 3000VA Universal Outlet 230V UPS  LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms. SMV3000AI-MS APC Easy UPS SMV 3000VA Cold-start capable provides temporary battery power when the utility power is out. APC Easy UPS SMV 3000VA UPS Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. APC Easy UPS

Product Type: Rack Cabinet Color: Black Rack Height: 42U Rack Width: 19" Standard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways ... Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panel

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions Includes: Documentation CD, Qty 1- Detachable IEC Power Cord, Rack Mounting brackets, Stabilization / Wall mounting feet, USB cable, User Manual Built in Battery 12V/9AH X 6 Nos.

Number of Power Cords 1 Maximum Height 1.6inches (41MM, 4.1CM) Maximum Width 17.5inches (445MM, 44.5CM) Maximum Depth 3.3inches (83MM, 0.0CM) Net Weight 0.99lbs. (0.45KG) Shipping weight 1.5lbs. (0.68KG) Shipping Height 2.5inches (64MM, 6.4CM) Shipping Width 18.6inches (473MM, 47.3CM) Shipping Depth 3.7inches (95MM, 9.5CM) Color Black

APC Smart-UPS SRT 96V 3kVA RM Battery Pack Extended-run battery systems provide flexible runtime to critical Smart-UPS applications. Includes: Rack mounting brackets, User manual, Warranty card

Protection Cold-start capable: Provides temporary battery power when the utility power is out. Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Output power capacity      2.1kWatts / 3.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 5% at full load Output Frequency (sync to mains)     50 Hz Waveform type     Sine wave Nominal Input Voltage   230V Input frequency           47 – 63 Hz Input Connections     IEC-320 C20 Input voltage range for main operations      180 – 287V Input voltage adjustable range for mains operation   170 – 300V Typical recharge time      3hour(s) Audible Alarm         Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating       300Joules 1 Year Warranty

Both internal and external accessibility Multiple users can access system Users are notified of problems Temperature and (optional) temperature & humidity monitoring Problems are identified through data and event logging User friendly UPS firmware upgrade capability VMware Ready PowerChute software can shut down multiple servers during outages

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

WSTRTUP-EZ-30 Features Start-Up Service 5X8 for (1) Easy UPS 3S 30kVA UPS A set of service options designed to deliver the vital resources, expertise, and tools needed to quickly and efficiently implement your APC by Schneider Electric solution Functional verification During each Preventive Maintenance visit, our Certified Field Service Engineers will run tests to verify your system is functioning correctly in all operational modes, stopping problems before they start. Installation verification Once the equipment is assembled, an APC Certified Field Service Engineer will verify all connections within the system have been made according to factory specification, and that it is functioning correctly in all modes of operation, ensuring optimal performance and extending the life of the product. Labor and travel expenses included Travel and labor expenses are included in most service contracts. Please see the statement of work for the service specifics. Logistics coordination APC will coordinate the logistics of

Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 20.7inches (527MM, 52.7CM) Maximum Depth 3.5inches (89MM, 0.0CM) Net Weight 6.02lbs. (2.73KG) Shipping weight 8.02lbs. (3.64KG) Shipping Height 2.8inches (71MM, 7.1CM) Shipping Width 27.4inches (696MM, 69.6CM) Shipping Depth 5.6inches (142MM, 14.2CM) Color Grey

Smart-UPS SRT 10000VA 230V APC Smart-UPS On-Line,10 kW /10 kVA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card

APC Easy UPS SMV 1400WATTS/2000VA, Universal Outlet, 230V Output power capacity 1.4kWatts / 2.0kVA Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC-320 C14 APC Easy UPS SMV 2000VA, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronic

Number of Power Cords 1 Maximum Height 1.7inches (44MM, 4.4CM) Maximum Width 19.0inches (483MM, 48.3CM) Maximum Depth 0.6inches (15MM, 0.0CM) Net Weight 0.51lbs. (0.23KG) Shipping weight 0.84lbs. (0.38KG) Shipping Height 3.9inches (99MM, 9.9CM) Shipping Width 23.4inches (594MM, 59.4CM) Shipping Depth 1.5inches (38MM, 3.8CM) Color Black