Power Products

Max Configurable Power (Watts) 20.0kWatts / 20.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Mercury solar panels bring the high standard that the Mercury brand has been known for.   Solar Cell 156x156mm(6inches) No of cells 60 (6x10) Dimensions 1640x992x40mm Weight 20kg Front Glass 3.2 mm tempered glass Frame Anodized aluminum alloy Junction Box IP65/IP67 rated(3 bypass diodes) Output Cables TUV (2Pfg1169:2007) UL4703, 4.0mm square Symmetrical length (-)900mm and (+)900mm Connectors MC4 compatible Mechanical load Test 5400Pa Operating Module Temperature -40°C to +85 °C Maximum System Voltage 1500V DC (IEC)/600V DC (UL) Maximum Series Fuse Rating 15A Power Tolerance 0/+5W Nominal Operating Cell Temperature(NOCT) 45±2 °C Temperature Coefficient of Pmax -0.42% /°C Temperature Coefficent of Voc -0.32% /°C

Description Mercury 15 kva 3 phase In 3 phase Out Automatic Voltage Regulator is 6 step transformer design in voltage stabilizing technology for extra reliability voltage protection against low and high voltage or any kind of surge that could damage your expensive equipment ideal for your heavy duty equipment can also applicable to you intelligent equipment because of soft start ability.

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

Specifications Nominal Voltage 220VAC Voltage Range 130~280VAC Frequency 50Hz Connection: Without plug Protection: Breaker Environment Temperature 0°C~+50°C Humidity 0%~90%RH (Non-condensing) Storage Temperature 15°C~+50°C Output Rating Voltage 220VAC Power Factor 0.6 Frequency 50Hz Accuracy 200V~242V @Input voltage 140V~280V 185V~200V @Input voltage 130V~140V Sockets Universal socket 2 x 16A AVR Buck Mode 0.84 Normal Mode 1 Boost1 Mode 1.2 Boost2 Mode 1.43 Low Voltage Protection <130VAC Over Voltage Protection >280VAC Low Load Protection: Yes Low Heating Protection Yes Physical Dimensions (WxDxH) (mm) Master Carton (WxDxH) (mm) 210 x 210 x 300 Gross Weight/Unit (kg) A 1000D: 3.0 7.8

Description Mercury 1.2KVA Inverter Modified Sine Wave The critically acclaimed Mercury 1.2KVA Inverter Modified Sine Wave with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

Description Mercury 5kva Spirit Plus Solar Hybrid Inverter MPPT Charge Controller, 4X 200AH Deep Cycle batteries and 8X high efficiency 300 watts Monocrystalline Solar Panels.  This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 5KVA Spirit Plus Hybrid Inverter Specification Inverter Mode Rated Power : 5KVA/5.0KW DC Input :   48Vdc, 114A AC Output:  230Vac, 50/60Hz, 21.7A AC Charger Mode AC Input :220 240Vac, 50/60Hz, 31.6A DC Output : 54.8Vac,  35A/ 15A AC Output : 230Vac, 50/ 60Hz, 21.7A Solar Charger Mode Max Charger Current 80A System DC Voltage Range  48Vdc Operating Voltage Range : 60  – 150Vdc PV Optimal Work Voltage Range : 70 – 145 Vdc Max Solar Voltage (VOC) : 150Vdc Max PV Input Current : 40A

Description Mercury 2kva Spirit Plus Solar Hybrid Inverter MPPT Charge Controller, 2X 200AH Deep Cycle batteries and 4X high efficiency 300 watts Monocrystalline Solar Panels.  This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 2KVA Spirit Plus Hybrid Inverter Specification Inverter Mode Rated Power : 2KVA/2KW DC Input :   24Vdc, 110A AC Output:  230Vac, 50/60Hz, 12.5A AC Charger Mode AC Input :220 240Vac 13.8A DC Output : 27.1Vac,  25A/ 10A AC Output : 230Vac, 50/ 60Hz, 12.5A Solar Charger Mode Max Charger Current 40A System DC Voltage Range  24Vdc Operating Voltage Range : 30 – 75Vdc PV Optimal Work Voltage Range : 45 – 72 Vdc Max Solar Voltage (VOC) : 75Vdc Max PV Input Current : 20A

Description Mercury 5 KVA SOHO Pure Sine Wave Inverter 48v The Mercury 5 KVA SOHO Pure Sine Wave Inverter 48v transformer based with 40A inbuilt charger and digitised microprocessor control LED display.  Designed for optimal performance and the most demanding renewable energy applications. Provides automatic changeover from NEPA, giving you uninterrupted power supply.  It is ideal for powering fridge freezers, computers, TVs, DSTV, game consoles, fans, lights, tablets, smartphones etc.

Description The critically acclaimed Mercury 2.4 KVA Modified Sine Wave inverter with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

Description The Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 220ah Deep Cycle Tall Tubular Batteries is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury Spirit 5kva Pure Sine inverter (power factor 1.0) with four 220ah Deep Cycle Tall Tubular batteries, which give an excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or

Description Mercury UPS Replacement Battery 7.5Ah 12V.  Minimum Order Quantity: 5

Specifications Input : Voltage 220V Range 130V-280V Frequency 50Hz Connection Schuko plug Protection Fuse Output : Power Capacity 2000VA/1200W Power Factor 0.6 Voltage 220V Frequency 50Hz Accuracy 200V-242V@input voltage 140V-280V 185V-200V@input voltage 130V-140V Sockets Universal Sockets 2x13A AVR : Buck mode 0.84 Normal mode 1 Boost1 mode 1.2 Boost2 mode 1.43 Low voltage protection <130Vac Over voltage protection >280Vac Low load protection yes Low heating protection yes Environment : Operating environment 0 to +50 Operating relative humidity 0 to 90% Relative Humidity(Non-condensing) Storage temperature 15C to +50C Physical : Dimension(WxHxD) 140x200x285 Net weight(kg) 4.6 Noise Less than 35dB Cooling mode Natural air cooling Housing material plastic+metal Display Segment LED + LED Delaying power supply to outlet 0s/8s

Description 300 Watt Monocrystalline Solar Panel Specification Maximum Power/Pmax(W)   300 Maximum Power Toleance    +3% Open Circuit Voltage   43.2 Short Circuit Current   8.85 Max Power Voltage    36 Max Power Current    8.35 Weight(Kg)    20.5 Dimensions(mm)  1000 Max System Voltage   27.00VDC +-0.5 Max Over Curretent Protecting Rating(A)   15 Module Application Class

Description Mercury 3kva Inverter, 2X 200AH Deep Cycle batteries and 4X high efficiency 260 watts Poly Solar Panels with Solar Charge Controller. This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 3kva Inverter Specification Intelligent long backup model Fully digitised microprocessor control LED Wide input range [90V -275V inverter mode 115V -270V UPS mode] Energy saving function with UPS green mode Cold start function Short circuit and overload protection Compatible with all generators Selectable  charging current 20A and 40A Weight 31kg

Key Features: Phase: Single Phase Output Voltage: Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range 6 Steps Transformer Design In Voltage Stabilizing – For that extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment

Output power capacity    6.0kWatts / 6.0kVA Nominal Output Voltage    230V Output Voltage Distortion    Less than 2% Output Frequency (sync to mains)     50/60Hz +/- 3 Hz Load Crest Factor     3 : 1 Topology      Double Conversion Online Waveform type    Sine wave Bypass   Internal Bypass (Automatic and Manual) Nominal Input Voltage     230V Input frequency       40 – 70 Hz (auto sensing) Input Connections     Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations      160 – 275V Input voltage adjustable range for mains operation     100 – 275 (half load)V Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time   1.5hour(s) Nominal Battery Voltage     192V Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel        Multi-function LCD status and control console Audible Alarm     Audible and visible alarms prioritized by severity Emergency Power Off (EPO)      Yes Surge energy rating     80Joules 1 Year Warranty

Description Mercury 10kVA 3-Phase Servo Stabilizer Mercury 10kVA 3-Phase Servo Stabilizer 277V-433V designed to automatically stabilizes voltage output current using auto-transformer, servo motor and an automatic control circuit.  Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads. Low, High, Fluctuating NEPA Voltage? When NEPA voltage is unstable, the Mercury Servo Stabilizer stands between NEPA and your precious electrical appliances stabilizing and protecting: Air Conditioners, Servers, Desktop Computers, Elevators, Lifts, Medical Equipment, Fridges, Freezers etc. Key Features Phase: Three Phase + N + GNaD Display Model: LED Ring transformer structure, small footprint, minimum magnetic leakage, low noise Multi-layer structure carbon brush with long service time and convenient daily maintenance Voltage Protection – High / Low Voltage, High Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy-duty Equipment

Description Mercury Stabilizer 20KVA Servo AVR Single Phase High precision auto voltage regulator power supply mainly consists of contact auto-transformer, servomotor, and an automatic control circuit. When grid voltage Is unstable or the load varies, the automatic control circuit drives the servo motor in compliance with a variety of output voltage, adjust carbon brush position on the contact auto-transformer. makes output voltage adjusted to be rated value and reaches a steady state. ZTY series products Introduce advanced technology, adopt energy-saving ring transformer and use Integrated circuit and high-quality components, which gives them a small footprint~ lightweight, high-efficiency, and energy-saving, no additional distortion of the output waveform, stable performance, and reliability.

Description Mercury 10kVA AVR – 10kVA Automatic Voltage Regulator / Stabiliser Wide Input Voltage Range 100V ~ 270Vac Ideal for office automation system & home appliances 6 Steps Transformer Design In Voltage Stabilizing – For extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Compact Design – Sleek & handyGet the Mercury 10kVA AVR for that all-important voltage protection to your equipment. With the Mercury 10kVA AVR, you can support heavy-duty equipment or a number of appliances at a stretch.Power fluctuations are common and for anyone using power generators (and who doesn’t?), the risk of voltage fluctuations is even higher. What you must know, also, is that voltage fluctuations can damage your important appliances, causing you financial loss.Automatic voltage regulators, AVR, provide the voltage stabilization that will protect your sensitive equipment. AVRs, commonly called stabilizers, are designed to stabilize the voltage.

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub

Description Mercury 5000VA Stabilizer A5000D Protect your precious appliances from damage.  The Mercury 5000VA Automatic Voltage Regulator AVR Stabilizer A5000D monitors all incoming electricity and regulates voltage fluctuations.  Automatically steps up low voltage and stepping down high voltage to levels that are safe for your connected appliances.   Key Features • Soft start protection • Low load protection • Low heating protection • Wide input voltage range • Compact design, sleek and handy • 1 x 10Amp and 1 x 16Amp terminals • High/Low voltage, high-temperature protection • Rugged and reliable design with digital display • Ideal for office automation system and home appliances • Transformer design in voltage stabilizing for extra reliability

If you are looking for the very best  5kva inverter system on the market, look no further!  The Mercury 5kva 48v Complete Inverter System 40a Charger is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 5kva inverter with 8x 200ah Deep Cycle batteries, which give an excellent performance as well as value for money. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter will be properly installed.   Your inverter will be installed by our experts who know the

APC Smart-UPS SRT 8000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Documentation CD, Installation guide, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.  

Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries The Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter up and running properly.

Specifications Capacity 30 KVA AC INPUT Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three phase+ N + G AC OUTPUT Voltage: 380 V / 400V Voltage: regulation accuracy   ± 3% Waveform:  Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion Response time: ± 10% varies< 1 s Over-voltage protection: Output phase voltage 433 V ± 5 V Under-voltage: Output phase voltage 316 V ± 5 V Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three phase) -lack-phase (three phase) -over temperature

Max Configurable Power (Watts) 30.0kWatts / 30.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations  304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 2 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor