Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries The Mercury Spirit 5kva Complete Pure Sine Wave Inverter System 4x 200ah Batteries is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter up and running properly.
High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty car
Output power capacity 6.0kWatts / 6.0kVA Nominal Output Voltage 230V Output Voltage Distortion Less than 2% Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Load Crest Factor 3 : 1 Topology Double Conversion Online Waveform type Sine wave Bypass Internal Bypass (Automatic and Manual) Nominal Input Voltage 230V Input frequency 40 – 70 Hz (auto sensing) Input Connections Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations 160 – 275V Input voltage adjustable range for mains operation 100 – 275 (half load)V Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 1.5hour(s) Nominal Battery Voltage 192V Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel Multi-function LCD status and control console Audible Alarm Audible and visible alarms prioritized by severity Emergency Power Off (EPO) Yes Surge energy rating 80Joules 1 Year Warranty
Specifications Capacity 30 KVA AC INPUT Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three phase+ N + G AC OUTPUT Voltage: 380 V / 400V Voltage: regulation accuracy ± 3% Waveform: Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion Response time: ± 10% varies< 1 s Over-voltage protection: Output phase voltage 433 V ± 5 V Under-voltage: Output phase voltage 316 V ± 5 V Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three phase) -lack-phase (three phase) -over temperature
Description The Mercury Deep Cycle Battery 100Ah 12V Elite 100. Leak-proof sealed maintenance free with a wide operating temperature, high impact resistant cast and low self-discharge. This battery comes with a 1-year warranty
Description If you are looking for the very best 2kva inverter system on the market, look no further! The Mercury 2.4kva-Complete Inverter System is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 2.4kva inverter with two 200ah Deep Cycle batteries, which give an excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter
Mercury 1.2kva Inverter One Mercury Elite 200AH Deep Cycle batteries Free Installation by a trained, experienced technician who understands the system One year warranty After purchase support When you choose this inverter bundle, you are getting a complete system. You will not have to find compatible battery—the inverter comes with the battery! The changeover is automatic and there is no fuel required. This system can run a number of different appliances and equipment. The LCD screen makes it easy to keep an eye on your equipment. One of the best features of the LCD screen is the ability to see your battery levels, so you know when they are getting low and when you need to stop using them. Because discharging your batteries too much can harm them, being able to always see their level is a huge bonus. This inverter system is also less expensive than most other units on
Phase: Single Phase Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range: 130V ~ 280Vac Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment 1 Year Warranty
Description The critically acclaimed Mercury 2.4 KVA Modified Sine Wave inverter with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply. Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.
Max Configurable Power (Watts) 40.0kWatts / 40.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains)50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Battery type VRLA Included Battery Modules 3 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Interface Port(s) E3S_Parallel, E3S_TempSensor
Equipment with Boost and Buck AVR to Stabilize the input voltage Micropocessor control guarantees high reliability Provides AC overload Protection Auto restart with AC recover Compact size, lightweight Fast Charging Off Mode Charging Cold start function
Description Mercury 2.4kva Inverter, 2X 200AH Deep Cycle batteries and 4X high efficiency 300 watts Monocrystalline Solar Panels with Solar Charge Controller. This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 2.4kva Inverter Specification Model 2.4KVA Voltage 230VAC Capacity 2400VA/1440W Voltage Range 170-280VAC (UPS Mode) […]
Specifications Nominal Voltage 220VAC Voltage Range 130~280VAC Frequency 50Hz Connection: Without plug Protection: Breaker Environment Temperature 0°C~+50°C Humidity 0%~90%RH (Non-condensing) Storage Temperature 15°C~+50°C Output Rating Voltage 220VAC Power Factor 0.6 Frequency 50Hz Accuracy 200V~242V @Input voltage 140V~280V 185V~200V @Input voltage 130V~140V Sockets Universal socket 2 x 16A AVR Buck Mode 0.84 Normal Mode 1 Boost1 Mode 1.2 Boost2 Mode 1.43 Low Voltage Protection <130VAC Over Voltage Protection >280VAC Low Load Protection: Yes Low Heating Protection Yes Physical Dimensions (WxDxH) (mm) Master Carton (WxDxH) (mm) 210 x 210 x 300 Gross Weight/Unit (kg) A 1000D: 3.0 7.8
PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply
Liebert itON 800 VA is a reliable line-interactive UPS designed for the protection of desktop computers and standalone IT equipment. Liebert itON comes complete with an automatic voltage regulator (AVR) allowing flexibility and reliability for PCs and other sensitive electronic equipment. With its compact design and easy to use controls, Liebert itON also provides sufficient back up time, allowing work in progress to be saved safely before proceeding with the system shutdown. Liebert itON also comes complete with automatic restart and cold start functions for increased continuity and availability.
Oraimo Selfie Light OSL-SC01 for smart phones for better selfies in Dark light with 3 light Modes , long standby and battery life can be used as flash with smart phones Standby time : 45-120 min if if kept turned on continuously Light Modes : 3 Battery: 80 Mah battery Oraimo Selfie Light OSL-S
APC Smart-UPS SRT 2200VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
If you are looking for the very best 2kva inverter system on the market, look no further! The Mercury 2.4kva Complete Inverter System is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 2.4kva inverter with two 200ah Deep Cycle batteries, which give an excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter will be properly installed.
Product Description Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Product Description Vertiv Liebert GXT5 1500VA 230V UPS The Liebert GXT5 UPS in an on-line double conversion USP solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single phase UPS operates with a high power efficiency and it is ideally suited to protect critical infrastructure in both centralized and edge of network applications.
APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Description Mercury 5000VA Stabilizer A5000D Protect your precious appliances from damage. The Mercury 5000VA Automatic Voltage Regulator AVR Stabilizer A5000D monitors all incoming electricity and regulates voltage fluctuations. Automatically steps up low voltage and stepping down high voltage to levels that are safe for your connected appliances. Key Features • Soft start protection • Low load protection • Low heating protection • Wide input voltage range • Compact design, sleek and handy • 1 x 10Amp and 1 x 16Amp terminals • High/Low voltage, high-temperature protection • Rugged and reliable design with digital display • Ideal for office automation system and home appliances • Transformer design in voltage stabilizing for extra reliability
Description Mercury 10kVA 3-Phase Servo Stabilizer Mercury 10kVA 3-Phase Servo Stabilizer 277V-433V designed to automatically stabilizes voltage output current using auto-transformer, servo motor and an automatic control circuit. Highly adaptable to all kinds of non-linear loads such as capacitive and inductive loads. Low, High, Fluctuating NEPA Voltage? When NEPA voltage is unstable, the Mercury Servo Stabilizer stands between NEPA and your precious electrical appliances stabilizing and protecting: Air Conditioners, Servers, Desktop Computers, Elevators, Lifts, Medical Equipment, Fridges, Freezers etc. Key Features Phase: Three Phase + N + GNaD Display Model: LED Ring transformer structure, small footprint, minimum magnetic leakage, low noise Multi-layer structure carbon brush with long service time and convenient daily maintenance Voltage Protection – High / Low Voltage, High Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy-duty Equipment