Power Products

Max Configurable Power (Watts) 30.0kWatts / 30.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations  304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 2 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Oraimo Selfie Light OSL-SC01 for smart phones for better selfies in Dark light with 3 light Modes , long standby and battery life can be used as flash with smart phones Standby time : 45-120 min if if kept turned on continuously Light Modes : 3 Battery: 80 Mah battery Oraimo Selfie Light OSL-S

Description Mercury UPS Replacement Battery 7.5Ah 12V.  Minimum Order Quantity: 5

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Description Mercury 5kva Spirit Plus Solar Hybrid Inverter MPPT Charge Controller, 4X 200AH Deep Cycle batteries and 8X high efficiency 300 watts Monocrystalline Solar Panels.  This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 5KVA Spirit Plus Hybrid Inverter Specification Inverter Mode Rated Power : 5KVA/5.0KW DC Input :   48Vdc, 114A AC Output:  230Vac, 50/60Hz, 21.7A AC Charger Mode AC Input :220 240Vac, 50/60Hz, 31.6A DC Output : 54.8Vac,  35A/ 15A AC Output : 230Vac, 50/ 60Hz, 21.7A Solar Charger Mode Max Charger Current 80A System DC Voltage Range  48Vdc Operating Voltage Range : 60  – 150Vdc PV Optimal Work Voltage Range : 70 – 145 Vdc Max Solar Voltage (VOC) : 150Vdc Max PV Input Current : 40A

Description Mercury 3kva Solar Hybrid Inverter MPPT SCC 2X 100AH Deep Cycle Batteries 2x 250 Watts Mono Solar Panels Mercury 3kva Solar Hybrid Inverter MPPT SCC 2X 100AH Deep Cycle Batteries 2x 250 Watts Mono Solar Panels.  This is a complete Solar System that will allow you to power your home with or without NEPA, day and night.

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide

Description Mercury Stabilizer 20KVA Servo AVR Single Phase High precision auto voltage regulator power supply mainly consists of contact auto-transformer, servomotor, and an automatic control circuit. When grid voltage Is unstable or the load varies, the automatic control circuit drives the servo motor in compliance with a variety of output voltage, adjust carbon brush position on the contact auto-transformer. makes output voltage adjusted to be rated value and reaches a steady state. ZTY series products Introduce advanced technology, adopt energy-saving ring transformer and use Integrated circuit and high-quality components, which gives them a small footprint~ lightweight, high-efficiency, and energy-saving, no additional distortion of the output waveform, stable performance, and reliability.

Specification 20 Hour Rate      100AH 10 Hour Rate      92AH 5 Hour Rate        80AH Overvoltage Restoration              41AH Internal Resistance Fully Charged Battery             4.5m Self Discharge: Capacity after 3 Month Storage 91% Capacity after 6 Month Storage 81% Capacity after 12 Month Storage               60% Max Discharge Current  800A (5S) Terminal              M3 Cycle     Initial Charging Less than 30A Float      Voltage 14.4 ~ 14.7V/77°F (25°C) Voltage 13.5 ~ 13.8V/77°F (25°C) Dimension (WxDxH) mm              208 X 407 X 174 Net Weight (kg)                30

PNET1GB Features APC ProtectNet standalone surge protector for 10/100/1000 Base-T Ethernet lines Protects an Ethernet data port from damaging surges. Compatible with Power over Ethernet (PoE) and 10/100/1000 Base-T networks. Catastrophic Event Protection SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges. ProtectNet Features & Benefits Protection Fail Safe Mode Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply

Nominal Voltage                                 12v Rated Capacity(20 Hour Rate)            200ah 20 Hour Rate (10.0A)      200AH 10 Hour Rate (18.4A)      184AH 5  Hour Rate  (32.0A)      160AH 1 Hour Rate   (120.0A)    120AH 15 Minute Rate (328A)     82.0AH

Description Mercury 5kva Spirit Plus Solar Hybrid Inverter Charge Controller Pure Sine Wave stand alone hybrid inverter system combining the functions of inverter, solar and AC  charger, provides a long run time uninterruptible power supply.  5KVA/5KW PF 1.0 48VDC with 80A MPPT Solar Charge Controller

Description Mercury LED 19.5 Monitor stunning  display with 1600 x 900 resolution delivers excellent detail, making it perfect for widescreen HD gaming, multimedia and productivity Rapid 3ms response time reduces deviations in transition time to deliver high-quality moving images bringing immersive graphics to your movies and games HDMI Hi definition picture quilty 3W x2 inbuilt speaker Save energy this monitor has low energy consumption.  Max Power Consumption 20 Watts

Description Mercury Spirit 2kva Pure Sine Wave Inverter Pure Sine Wave  inverter provides a long run time un-uninterruptible power supply.  2KVA/2KW PF 1.0  24VDC

Specifications Input : Voltage 220V Range 130V-280V Frequency 50Hz Connection Schuko plug Protection Fuse Output : Power Capacity 2000VA/1200W Power Factor 0.6 Voltage 220V Frequency 50Hz Accuracy 200V-242V@input voltage 140V-280V 185V-200V@input voltage 130V-140V Sockets Universal Sockets 2x13A AVR : Buck mode 0.84 Normal mode 1 Boost1 mode 1.2 Boost2 mode 1.43 Low voltage protection <130Vac Over voltage protection >280Vac Low load protection yes Low heating protection yes Environment : Operating environment 0 to +50 Operating relative humidity 0 to 90% Relative Humidity(Non-condensing) Storage temperature 15C to +50C Physical : Dimension(WxHxD) 140x200x285 Net weight(kg) 4.6 Noise Less than 35dB Cooling mode Natural air cooling Housing material plastic+metal Display Segment LED + LED Delaying power supply to outlet 0s/8s

Description Mercury 1.2kva Inverter, 1X 100AH Deep Cycle battery, 1X highly efficient 300 Watt Monocrystalline Solar Panel and Solar Charge Controller.  Ideal for one bedroom flat, private office and small shops. Example use case: 1. Laptop 1. Modem/Router 1. Solar Fan 2 Energy Saving Bulbs Smartphones This system will keep the above items (total 150 watts) powered all day with sunlight and when the sun goes down 6 hours or more depending on usage. 1.2kva Inverter Specification Model 1.2k Voltage 230VAC Capacity 1200VA/720W Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) Voltage Regulation(Battery Mode) 230VAC +/-10% Transfer Time 20 ms Typical Waveform Modified Sine Wave Battery Voltage 12VDC Floating Charge Voltage 13.75VDC +-0.25 Charge Current 10/20A Dimention 330 x 227.8 x 92.5 Net Weight (Kgs) 2.6 Gross Weight (Kgs) 3.1

Max Configurable Power (Watts) 40.0kWatts / 40.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains)50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Battery type VRLA Included Battery Modules 3 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Interface Port(s) E3S_Parallel, E3S_TempSensor

Key Features: Phase: Single Phase Output Voltage: Over-voltage Protection; Low-voltage Protection Display Model: LED / METER Wide Input Voltage Range 6 Steps Transformer Design In Voltage Stabilizing – For that extra reliability Voltage Protection – High / Low Voltage, High-Temperature Protection Soft Start Protection – Safeguards your expensive equipment Ideal for Heavy Duty Equipment

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES Output power capacity: 1.3 KWatts / 2.0 kVA Topology: Line Interactive Waveform type: Pure Sine wave Nominal Output Voltage: 230V; Nominal Input Voltage: 230V Input frequency: 47 - 63 Hz Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Replacement Battery: APCRBC148 Intelligent battery management Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning USB Interface Port; Network manageable Multi-function LCD status and control console Alarm when on battery : distinctive low battery alarm : configurable delays Automatic self-test Cold-start capable Shipping weight: 30.0kg  

Description Mercury 5kva Inverter 4X 200AH Deep Cycle batteries and 8X high efficiency 300 watts Monocrystalline Solar Panels with Solar Charge Controller. This is a complete Solar System which will allow you to power your home with or without NEPA, day and night. 5kva Inverter Specification Intelligent long backup model Fully digitised microprocessor control LED Wide input range [90V -275V inverter mode 115V -270V UPS mode] Energy saving function with UPS green mode Cold start function Short circuit and overload protection Compatible with all generators Selectable  charging current 20A and 40A Weight 35kg

Description If you are looking for the very best  2kva inverter system on the market, look no further! The Mercury 2.4kva-Complete Inverter System is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 2.4kva inverter with two 200ah Deep Cycle batteries, which give an excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option.   While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter

If you are looking for the very best  2kva inverter system on the market, look no further! The Mercury 2.4kva Complete Inverter System is an incredible package deal, offering you everything you need to get your inverter up and running. With a one year warranty which includes installation and after-sales support, you do not have to spend a fortune to get your inverter running properly. We have paired a Mercury 2.4kva inverter with two 200ah Deep Cycle batteries, which give an excellent performance as well as value for money and you can see it all working before you pay, by selecting our pay on delivery option. While some other inverter providers might just sell you the system, we actually install the unit and make sure that you have all of the support you need once the inverter is installed. You do not have to worry about whether or not your inverter will be properly installed.

Max Configurable Power (Watts) 20.0kWatts / 20.0kVA Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50 Hz Sync to mains, 60 Hz Sync to mains Other Output Voltages 380, 415 Topology Double conversion online Output Voltage THD < 3% linear load Output Voltage Tolerance +/- 1.5 % Input Input frequency 45 - 65 Hz Input voltage range for main operations 304 - 477V Input Total Harmonic Distortion Less than 3 % for full load Other Input Voltages 380, 415 Input Power Factor at Full Load 0.99 Batteries & Runtime Battery type VRLA Included Battery Modules 2 Nominal Battery Voltage 240 V Battery Slots Empty 1 Replacement battery cartridge note UPS weight does not include battery weight. Maximum Available Short Circuit Current 10kAmps Communications & Management Interface Port(s) E3S_Parallel, E3S_TempSensor

Specifications Capacity 30 KVA AC INPUT Voltage range 277 V ~ 433 V Frequency range 50/60 Hz Phase Three phase+ N + G AC OUTPUT Voltage: 380 V / 400V Voltage: regulation accuracy   ± 3% Waveform:  Sinusoidal Efficiency: 96% Power factor: 0.8 Distortion: No additional waveform distortion Response time: ± 10% varies< 1 s Over-voltage protection: Output phase voltage 433 V ± 5 V Under-voltage: Output phase voltage 316 V ± 5 V Other protections: Start-up delay -mechanical failure -over-current -short-circuit -phase order (three phase) -lack-phase (three phase) -over temperature

Description Mercury 1.2KVA Inverter Modified Sine Wave The critically acclaimed Mercury 1.2KVA Inverter Modified Sine Wave with inbuilt charger provides automatic changeover from NEPA, giving you undisrupted power supply.   Sleek, compact, and lightweight, with overload protection, and digital LCD display which elucidates battery and load levels.

Output power capacity 375 Watts / 650VA Output Connections (4) Universal receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections BS1363A British Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

equipment with Boost and Buck AVR to stabilize the input voltage Microprocessor control guarantees high reliability Provides AC overload Protection Auto-restart with AC recover Compact size, lightweight Off Mode Charging Overload protection and alarm Small Routers, Bridges, and Hub