APC by Schneider Electric

APC SMART-UPS C 2000VA (1300 W) LCD 230V SMC2000I: QUICK SPECS AND FEATURES

• Output power capacity: 1.3 KWatts / 2.0 kVA
• Topology: Line Interactive
• Waveform type: Pure Sine wave
• Nominal Output Voltage: 230V; Nominal Input Voltage: 230V
• Input frequency: 47 – 63 Hz
• Typical recharge time: 3hour(s)
• Expected Battery Life (years): 3 – 5
• Replacement Battery: APCRBC148
• Intelligent battery management
• Boost and Trim Automatic Voltage Regulation (AVR) & Power conditioning
• USB Interface Port; Network manageable
• Multi-function LCD status and control console
• Alarm when on battery : distinctive low battery alarm : configurable delays
• Automatic self-test
• Cold-start capable
• Shipping weight: 30.0kg

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Product Description

• Output power capacity      2.1kWatts / 3.0kVA
• Nominal Output Voltage    230V
• Output Voltage Distortion    Less than 5% at full load
• Output Frequency (sync to mains)     50 Hz
• Waveform type     Sine wave
• Nominal Input Voltage   230V
• Input frequency           47 – 63 Hz
• Input Connections     IEC-320 C20
• Input voltage range for main operations      180 – 287V
• Input voltage adjustable range for mains operation   170 – 300V
• Typical recharge time      3hour(s)
• Audible Alarm         Alarm when on battery : distinctive low battery alarm : configurable delays
• Surge energy rating       300Joules
• 1 Year Warranty

Product Description

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

APC Smart-UPS RT 15kVA RM 230VHigh density, double-conversion on-line power protection with scalable runtime. Increases availability by allowing the UPS to be connected to two separate power sources. Alpha-Numeric Display which displays system parameters and alarms.

Protection

• Cold-start capable: Provides temporary battery power when the utility power is out.
• Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
• Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
• Rack/Tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.